Fixing a Topfield single tuner TF6000COK (Digitenne)

For a couple of years I have been using this Topfield single tuner TF6000COK tuner to watch Digitenne (Dutch DVB-T service). Recently the reception got really bad and I tried to find out what was wrong with it. After rescanning all channels didn’t help I googled and came across a great page describing my problem.

The Topfield tuner

The page is in Dutch and explains the bad reception can be caused by a faulty capacitor in the power supply. It would not be the first time for me to find a dead capacitor causing trouble. Some years ago there was a huge issue with motherboards and power supplies failing due to a bad series of capacitors, known as the capacitor plague. Measuring the 5V on the antenna output of the tuner confirmed the power supply issue, as I only measured about 3.5V.

So I opened up the box and voided the warranty like I love to do 🙂

The guts

I replaced the capacitor C206 with a 470µF/25V one and reseated the psu board and measured the antenna output again, it as 5.02V this time. I tried out the tuner and voila, it worked fine again!

The new capacitor in place

In just 5 minutes of soldering and in about half an hour total if you include searching for the page and waiting for the soldering iron to heat up the problem was fixed. It makes me wonder how many devices are thrown away every day that might be as easy to fix as this one if only more information would be available and more stuff would be open source with schematics available online. Maybe more people would try to fix stuff instead of throwing it away. This fix required simple soldering but I have had ‘broken’ TV’s that just required a new internal fuse to operate fine again, a fix that took less time than this one actually.

This one capacitor is all it took to fix the tuner

It reminds me of an initiative called Repair Cafe, it’s a cafe where you can bring broken household electronics (amongst other things) and skilled people will try to fix it for you. It is the only one of it’s kind as far as I know in the Netherlands. It would be great if more electronics would (tried to) be fixed and less thrown away in the future, but I don’t see that happening any time soon.

Facebook Twitter Linkedin Digg Delicious Reddit Stumbleupon Tumblr Posterous Email

This entry was posted in Uncategorized. Bookmark the permalink.

6 Responses to Fixing a Topfield single tuner TF6000COK (Digitenne)

  1. Gert says:

    I have the same reciever, same layout, but my capacitor C206 is a 330µF/25V. The website you mentioned talks about a 470µF/16V, but has a different layout.

    I think I have a different problem, my output voltage is 5.0V

    • sander says:

      Hi Gert, I had a different value capacitor as well in mine so that might be a different revision of the board. Do you measure the 5v at the antenna output? If you do, you do indeed have a different problem.

  2. Just me says:

    Hi. How did you measure the 5v?

    From antenna output, but antenna plugged or not?

  3. Harm says:

    Hi, thnx for the info, repaired mine too!
    However, did you explore the possibility to use connector J4 on the tunerboard? Is it a rs232 connection or so?
    regards

    • sander says:

      Hi good to hear you managed to repair it. I have not looked at connector J4, would be nice to know if you find anything out about it!

Leave a Reply to sander Cancel reply

Your email address will not be published. Required fields are marked *